Structural & Safety: * Dimensions: Max 48″ wide, 12′ long. +3 * Roll Bar: Must support driver’s weight and protect head through full range of motion. * Floor Pan: Solid-rigid material to prevent body-to-ground contact. +1 * Bodywork: Must protect legs/feet from leaving the vehicle during impact. +4 * Nose Area: Minimum 3″ radius (6″ diameter) in at least one direction. +4 Mechanical & Steering: * Brakes: Must skid or stay stationary when pushed; must have two wheels on the same axle with brakes. +1 * Steering: Must achieve a 25′ turning radius and be stable at high speeds. +1 * Axles: Minimum 1/2″ (12mm) diameter if supported on one end only. +1 * Hardware: Safety wire or cotter pins required on cantilevered nuts; nylon/double nuts alone are unacceptable. +1 Electrical & Power: * Throttle: Must automatically shut off when released (“dead man” cut-off). +1 * Kill Switch: Driver must be able to actuate from driving position; official switch must be marked with a 4″ red triangle. +4 * Batteries: Securely mounted to the frame; must weigh < 73 lbs and be non-leaking lead-acid.+3
